Structural Features Of Turret Milling Machine

1. The main components such as the base, body, workbench, middle slide, lifting slide, etc. are all cast with high-strength materials, and are artificially aged to ensure the stability of the machine tool for long-term use.
2. The milling head is equipped with a turret milling head, and the spindle is equipped with two feeding methods: manual and micro-motion, which makes processing convenient and accurate;
The milling head can be adjusted ±45° in the vertical plane and rotated 360° in the horizontal plane to expand the processing range of the machine tool.
3. The workbench has three types of manual feeding, motorized feeding and motorized fast feeding in the longitudinal and transverse directions. The motorized feeding can obtain 8 different feeding speeds, which can meet different processing requirements; fast feeding can make the workpiece quickly reach the processing position and shorten the non-processing time.
4. The Z-direction lifting of the lifting platform can be achieved by manual and motorized methods, and the manual and motorized methods are interlocked, eliminating unsafe factors.
5. The X-axis travel of the worktable can reach 800mm, and the X, Y, and Z three-way guide rails are subjected to ultrasonic quenching, precision grinding, and scraping treatment to improve accuracy and extend the service life of the machine tool.
6. The manual lubrication device can force lubricate the longitudinal, transverse, and vertical screws and guide rails to reduce the wear of the machine tool and ensure the efficient operation of the machine tool;
At the same time, the cooling system changes the flow of coolant by adjusting the nozzle to meet different processing requirements.
7. The machine tool operating system is suspended on the upper right side of the machine tool through a support arm, which conforms to the principle of ergonomics and is easy to operate;
The operation panels are all designed with figurative symbols, which are simple and intuitive.
8. The spindle of the turret milling machine can be selected from R8.NT30\NT40,
9. Equipped with an improved electrical box and controller with 110V, 220V output sockets.