Wire Cutting Control Cabinet For Aluminum Alloys
Aug 27, 2025| Wire Cutting Control Cabinet for Aluminum Alloys is a specialized high-frequency power supply for wire cutting of aluminum alloys.
Domestic Patent: A specialized high-frequency power supply for wire cutting of aluminum and aluminum alloys. The output characteristics of the high-frequency power supply effectively prevent the adhesion of aluminum oxide to the molybdenum wire during aluminum processing.
Product Features:
1.The conductive block does not discharge, solving the issue of wire breakage during wire cutting of aluminum parts.
2.Resolves the problem of machine wear on conductive blocks during wire cutting of aluminum parts.
3.Solves the issue of trajectory distortion during wire cutting of aluminum alloys (preventing workpiece scrap).
4.Improved efficiency in wire cutting processing of aluminum alloys.
5.Solved the problem of short circuits during aluminum part cutting.
6.Enhanced the surface roughness of processed workpieces.
The control cabinet is equipped with a frequency converter, allowing arbitrary adjustment of the wire feed roller speed, thereby improving the surface finish of workpieces. It offers high efficiency (cutting efficiency reaching 12,000 to 15,000 mm² per hour), energy savings (energy consumption as low as 0.85 kWh per hour, achieving 50% energy savings compared to conventional machines), and environmental friendliness (featuring a high-pressure filtration tank for the working fluid, which requires replacement only once every 30 working days, significantly extending service life and reducing waste discharge frequency).